We have already discussed about phasors and its simple properties. Perhaps now it is the time that we want to explore a little more. Every effort is made to keep it as simple as our previous article.

Before proceeding further I want to clarify that here we are mainly concerned about phasor multiplication and 'j' and 'a' operators.This article will also help us better appreciate the use of symmetrical components ( for analysis of unbalanced 3-phase systems) and subsequently other phenomena in transformer and AC circuits.

We know that phasor in the form x+j y is drawn as an arrow from origin to (x, y) point.

Till now I represented the phasor in x+j y form also called rectangular form. A phasor can also be represented in polar form. In the polar form we also need two parameters, these are length of phasor (r) and angle(phi) it makes with the +ve horizontal axis . See the Figure-A.

**Phasor Multiplication**

I have already discussed the use of j in phasor representation.

We know that j is equal to square root of -1.

or j = sqrt(-1) so j.j = -1

Now consider two phasors A = 2 + j 3 and B = -1 + j 2

Let us multiply A and B

A.B = (2+j 3) . (-1 + j2) = -2 + j 4 -j 3 + j.j (3.2) = -2 + j 1 - 6 = -8 + j 1

Directly multiply each of real and imaginary parts from A with each of B. It is simple!

It is even easier to multiply in polar form. See the example below. As illustrated in figure-A, we represent below the phasors A and B in the polar form. For phasor A, 4 is its length and it makes 20 degrees with x-axis. Similarly B is of length 3 units and it makes 40 degrees with +ve horizontal axis

( 20, 40 and 60 are angles in degree)

Representing in polar form, the multiplication has become extremely easy.

Representing in polar form, the multiplication has become extremely easy.

Just multiply the lengths and add the angles to get the new phasor.

You can convert it back to the rectangular form.

A.B = 12(cos 60 + sin 60)

**j and a Operators**

What we will get, if a phasor is multiplied with j?

for example

if A = 3 + j 4

Then j A =j(3 + j 4) = j 3 + j.j 4 = -4 + j 3 ( As j.j =-1)

Now draw the phasor -4 + j 3. It will be observed that the angle between 3 + j 4 and -4 + j 3 is 90 degrees.

Any phasor when multiplied by j will rotate the original phasor by 90 degrees in anticlockwise direction. Now if the resultant phasor is again multiplied by j then the phasor is again rotated by 90 degrees in anticlockwise direction, so on.

In our example j(-4 + j 3) = -j4 -3 = -(3 + j 4), which is in opposite direction to (p + j q). So clearly the phasor has again undergone 90 degrees anticlockwise rotation. See the figure. Every time we apply j, we rotate the phasor counterclockwise by 90 degrees.

Now let us consider about another operator ' a ' (standard symbol). It has the capacity to rotate a phasor counterclockwise by 120 degrees. applying ' a ' twice the phasor is rotated by 240 degrees, by applying thrice the original phasor is rotated 360 degrees or one complete rotation, so the original phasor.

It is clear that as the phasor is rotated 120 degrees (magnitude remains the same) then in polar form

a = 1

It is clear that as the phasor is rotated 120 degrees (magnitude remains the same) then in polar form

a = 1

__/120deg__
in rectangular form a = 1.cos 120 + j 1.sin 120

or a = -0.5 + j 0.866

see the Fig-C how a phasor A is rotated by 120 degrees when applied with operator a.

I colored them red green and blue to recall our balanced three phase system.

Clearly we are able to get the phasors B and C by applying the operator a repeatedly on phasor A.

Otherwise we can say that, the balanced system of A-B-C sequence can be equally represented in terms of 'a' and A only. The operator a will be used more in our article symmetrical components.

or a = -0.5 + j 0.866

see the Fig-C how a phasor A is rotated by 120 degrees when applied with operator a.

I colored them red green and blue to recall our balanced three phase system.

Clearly we are able to get the phasors B and C by applying the operator a repeatedly on phasor A.

Otherwise we can say that, the balanced system of A-B-C sequence can be equally represented in terms of 'a' and A only. The operator a will be used more in our article symmetrical components.

## 11 comments:

Great tutorial, thank you.

thanks alot....this tutorial was very helpful....but can u please show how do we add j operator in polar form ?

Good Tute....

very helpful sir

thanks for this. it is very help full for me

EEEEEK NUUUUMBER

Basic theory but best tutorial, very very thankful Sir you are the humble teacher....

Good tutorial, I am very happy to find such a unique and infomratic blog on electrical-engineering. The written material is narrated in a easy and informatic way. I am happy, keep it up

It’s appropriate time to make some plans for the future and it is time to be happy. I have read this post and if I could I wish to suggest you few interesting things or advice. Perhaps you could write next articles referring to this article. I desire to read even more things about it! surplus electronics

thank you very much

Excellent post and it is really useful for most of the freshers.

Japanese Classes in Chennai

Japanese Coaching Classes in Chennai

pearson vue test center in chennai

IoT Training in Chennai

Xamarin Training in Chennai

Node JS Training in Chennai

Japanese Classes in OMR

Japanese Classes in Porur

## Post a Comment